Owner's Manual
Table Of Contents
- User Manual
- Introduction
- Package contents
- Safety precautions
- Notes on use
- Part names and functions
- Preparation for use
- Placing the platter
- Setting up the turntable
- Assembling the tonearm
- Tonearm balance and tracking force
- Setting tonearm balance
- Setting tracking force
- Setting the anti-skate adjustment
- Installing/removing the dust cover
- Setting MM (VM)/MC cartridge selector switch
- Setting pre-amplifier selector switch
- Connecting to connectable equipment (active speakers, amplifiers, etc.)
- Connecting the AC adapter
- Playing a record
- Care
- Replacing the stylus
- Replacing a cartridge
- When the turntable is moved
- Troubleshooting
- Dimensions
- Specifications
- Quick Start Guide
- Caution Guide
English
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this caution guide to
ensure that you will use the product correctly. Please keep
this manual for future reference.
■Safety precautions
Although this product was designed to be used safely, failing
to use it correctly may result in an accident. To ensure safety,
observe all warnings and cautions while using the product.
■Important information
Warning:
To prevent fire or shock hazard, do not expose this apparatus
to rain or moisture.
Caution:
•Do not expose this apparatus to drips or splashes.
•To avoid electric shock, do not open the cabinet.
•Refer servicing to qualified personnel only.
•Do not expose this apparatus to excessive heat such as
sunshine, fire or the like.
•Do not subject this apparatus to strong impact.
•This apparatus should be located close enough to the AC
outlet so that you can easily grasp the AC adapter at any
time.
•In case of emergency, disconnect the AC adapter quickly.
•Do not place any objects filled with liquids, such as vases,
on this apparatus.
•To prevent fire, do not place any naked flame sources (such
as lighted candles) on this apparatus.
•Do not install this apparatus in a confined space such as a
bookcase or similar unit.
•Install this apparatus only in the place where ventilation is
good.
■For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and
receiver.
–Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician
for help.
■For customers in Canada
IC statement:
CAN ICES-3 (B)/NMB-3(B)