Specifications

English
7
Operation


may affect the visibility of the speed-indicating strobe dots. If this is a
problem, simply cover the area with your hand, an album cover, etc.)
Preparing to Play
 
tone arm rest if it is locked.
 
strobe illuminator will light up.
 
the light for illumination of the stylus tip position on the record.
 
 
the center spindle before placing the record on the platter.
 
 
 
Playing the Record
1. Press the start/stop button; the platter begins to rotate.
 
UP position.
 
the record.
 
 
record and play begins.
 
Use the finger-lift on the headshell assembly to position the tone
arm over the desired location on the record. Carefully lower the
tone arm to the record surface.
Checking and Adjusting Pitch
 
pressing the pitch button. Then move the pitch adjust slide control
 
 
2. As illuminated by the red light coming from beneath the power
dial, observe the strobe dots on the edge of the platter. If the
appropriate row of strobe dots appears to be stationary, the platter
is moving at the precise rated speed. If the dots appear to be
moving to the right, the platter is moving below rated speed; if
they appear to be moving to the left, the platter is moving above
rated speed.
 
will hold the platter at precise rated speed regardless of the
 
to the left of the pitch adjust slide control’s center position will
 
variable pitch is active.)
 
platter. The appropriate direction LED will illuminate.
Suspending or Ending Play
1. To suspend play, lift the tone arm with the cueing lever.
2. When play is finished, raise the cueing lever, move the tone arm
to the rest position and secure the tone arm with the tone arm
locking clamp.
 
light down.
 
platter rotation.
 





