Specifications

4
Tone Arm Assembly Diagram
Figure 3
 
 
 
 
a full turn to the right to permit removal of the headshell.
 
S-shaped tone arm geometry reduces tracking error.
 
 
arm to remain parallel to the record surface. (The proper setting
is “0” for the included cartridge.)
 
Elevates tone arm above record surface.
 
Locking clamp secures tone arm during transport.
 
Used to set the amount of tone arm lift.
 
 
hydraulically damped to slow tone arm descent.)
 
Applies a small outward force to the tone arm, counteracting the
tendency of the tone arm to move inward toward the center of
the record.
 
Balances the tone arm and provides adjustment for proper
downward tracking force on the stylus.
 
 
Locks the tone arm height setting. (Always fully unlock
before attempting to make a height adjustment.)
Figure 2
 
Allows the internal stereo phono pre-amp to be bypassed
when the turntable is used with equipment having
magnetic phono inputs.
 
Use this output to connect your turntable to the USB input of
your computer. Please see included software guide for
instructions.
29
Rear View Diagram