Product manual

AEWCI Software Manual
15
CAUTION:
When the AE Reflector service is
running, any computer connected to the network
running the AEW Control Interface Software has
access to and can change parameters of any
receiver connected to the network. This includes:
rechannelizing the system, muting receivers, and
disabling or enabling receivers.
Navigating the View Menu
The View menu gives you:
the opportunity to choose either large-, medium-, or
small-sized receiver channel displays in the Main
System window.
the ability to change the display in the Main window to show
all receiver names or all transmitter names.
Channel Display
To change the size of the channel display:
1. Click View.
2. Select Large Size Receivers View to see up to ten full-height
receiver channel strips.
3. Select Medium Size Receivers View to see up to twenty half-
height receiver channel strips.
4. Select Small Size Receivers View to show up to 40 mini
receiver channel strips.
Note: The number of visible receiver channel strips is also affected
by the computer’s display resolution and window size.
Name Display
To change name display in the Main System window:
1. Go to View>Show Receiver Names to show receiver names
at bottom of each channel strip.
2. Go to View>Show Transmitter Names to show transmitter
names at the bottom of each channel strip.
Note: Transmitter names must be set (entered) on the transmitter
itself. See the system manual for details.
Installing and Using the AE Reflector Service
The AE Reflector service is a Windows software application that
allows multiple computer users on the network to view, change
and configure AE Wireless receiver parameters. You may install the
application on one of the networked computers running the AEW
Control Interface Software.
Note: AE Reflector runs as a Windows service; it is not Mac-
compatible.
Note: To use AE Reflector, all of your receivers must have version
4.2 or later firmware. To verify firmware version, launch the AEWCI
program, then click File>Network Configurations. The Network
Configuration window opens, showing firmware version for all
receivers on the network.
Installing AE Reflector:
Note: Make certain your AEWCI software is not running on any
computer systems in your network when you install AE Reflector.
1. Using Windows Explorer or other file management tool,
navigate to the AE Reflector folder on your hard drive. For a
default installation, this folder is located inside Program Files\
Audio-Technica\Artist Elite Wireless Control Interface ver. 3.0.
2. Open the AE Reflector folder and double click on the Install
AE Reflector icon. A DOS-type window will open indicating
status of the install. When the install is complete, the window
will prompt, “Press any key to continue.” Press any key to
close the window and complete the installation.
Note: To start the service, you will need to restart the computer.
After installation, the AE Reflector service operates in the background
automatically, every time the computer is started.
To uninstall the AE Reflector service, locate the AE Reflector folder
within your program files, open it and double click the Uninstall AE
Reflector icon.