User Manual

12
Wearing the product
Insert the side of the product marked "L" (LEFT) into
the left ear, and the side marked "R" (RIGHT) into the
right ear as shown in the figure.
• When worn on the ear while slightly bending the 3D
loop support included with the headphones, the fit
is stable.
Using the product
Attaching/Removing the silicone rings
1. Remove the 3D loop supports that come
attached to the headphones.
2. Attach the silicone rings to the headphones.
3. Wear the headphones.
3D loop support The left bushing has a protrusion for
distinguishing between the left and
right.
Align the protrusion on the
headphone with the notch
in the silicone ring
The left bushing
has a protrusion for
distinguishing between
the left and right.
• When reattaching the 3D loop supports, make sure to attach them correctly. If you attach them incorrectly, they will
not enter the charging case.
The 3D loop supports are attached to the headphones to provide better fit and stability. Use the included silicone rings
as needed.
Make sure the shapes of headphone and
silicone ring match.