User guide
9
Connections
Input Connections
The Reference Phono 10 offers two sets of RCA input connectors, for
connecting multiple turntable/tonearm cables. There is a ground terminal
connection adjacent to the RCA input connectors to allow grounding of the
turntable(s).
Output Connections
There is one set of BAL and one set of RCA output connectors for connecting
to line inputs (Direct, Aux, Phono, Tuner, etc.) of your linestage/preamplier.
All input/output connectors are gold plated and connect ‘ground’ before
‘hot’. On disconnect, ‘hot’ is disconnected rst.
Note: A ‘passive’ line stage is not recommended for use with the Reference
Phono 10 as it may not provide the gain necessary to amplify the output of
the Reference Phono 10 to adequate levels to the power amplier.
It is recommended that all connections be made to the Reference Phono
10 with the power turned ‘off’.