User guide

14
Operation
SETTINGS MENU
Touching the settings icon located in the bottom right of the screen (it
appears as a gear) brings you to a submenu with different options related
to the setup and functionality of the Reference Phono 10 (g. 7).
Input Names: Selecting Input Names will allow you to customize the names
of each input on the Reference Phono 10. Once selected, the input bar will
appear at the top of the screen with an alphanumeric keyboard below it. To
change the name of any input, simply touch the input until it is highlighted
and type in the new name. When input naming is complete, select ‘DONE’
to go back to the settings menu.
Tube Hours: The Hours Meter displays the total number of hours the
Reference Phono 10 has been running. This is useful to gauge tube life
and prepare for eventual replacement. The hours meter may be reset after
the tubes have been changed by touching the ‘Reset’ button located in the
bottom right of the screen.
About: Touching the ‘About’ button displays a screen with the current
software version of the Reference Phono 10. This information can be useful
in the event the Reference Phono 10 needs troubleshooting. In the bottom
right of the About screen is a ‘Defaults’ button. Selecting the defaults
button will return all settings in the Reference 10 as they were shipped from
the factory.
Note: Resetting the Reference Phono 10 back to factory settings does NOT
reset the hours meter.
g. 7