RXD200 & TXD200 wireless hifi transmitter and receiver Owners manual
Welcome to audio pro wireless Thank you for choosing swedish Audio Pro. We have delivered innovative audio products since 1978, with strong focus on good music experiences in your home. The TXD/RXD200 wireless dongels are more than just a wireless audio device. It’s combined audio and acoustical knowledge compressed into a high quality wireless network totally dedicated to deliver hifi audio.
Mac/PC » powered speakers Mac/PC » Audio pro Living speakers LV1 LV2, LV2e LV3 airport express/apple TV » Audio Pro LIVING SPEAKERS LV1 LV2, LV2e LV3 TV » powered speakers LV1 LV2, LV2e LV3
Mac/PC » stereo/AV receiver With All sound devices From iPhone/iPad/iPod-dock, Apple AirPort® Express, Sonos®, cellphone, network player, CD-player, turntable, NAS or any other sound source with Line out/Digital out to powered speakers/stereo/Audio Pro Living series speakers.
MULTIROOM sound MULTIROOM sound using different house codes (wifi channels) HC2 HC2 HC2 HC1 HC1 HC1
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
14. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under thee following conditions: A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen into the apparatus, C. If the apparatus has been exposed to rain or water, D. If the apparatus does not operate normally by following the operating instructions.
english Transmitter signal frequency: 2.4 GHz (WIFI) Wireless signal resolution: 16 bit/48 kHz (full CD quality) Frequency response: 20 Hz – 22 kHz Dimensions (W x H x L): 120 x 32 x 90 mm Mini USB: 5 V / min. 500 mA DAC: BurrBrown Sound card: Sonix (TXD200) TXD200 input: 3.5mm Analogue & Optical combined + USB audio from Mac/PC RXD200 output: 3.5mm Analogue & Optical combined In the box: RXD200 Receiver unit 80mm USB/Mini cable 400mm USB/Mini cable 500mm optical cable 3.5mm stereo cable TOSLink 3.
Product overview House Code switch LED indicator Pairing button Mini USB power Sound In/Out Optical and analogue TXD200: Line In RXD200: Line Out WIRELESS Range 100m 100m Receiver Receiver 20m Transmitter 20m Receiver Receiver Receiver 50m
GENERAL setuP Setting up your wireless audio network is real simple. Plug n’ play without any software installations. The transmitter and receiver need power, either through a USB socket on a computer or through AC adaptor power supply (USB power supply available separately). Connect TXD/RXD to any device with audio input or output. RXD200 and TXD200 must be set on same House Code 1, 2 or 3 to communicate with each other. Setup: 1. Set units to same House Code 1, 2 or 3. 2.
Mix optical and analogue Connecting audio devices with the Optical/Analogue in and output can be done both optically and analogue. For example: Connect with optical cable to transmitter and analogue cable to receiver, or vice versa. TXD200 transmitter Connect to analogue or optical to sound source. RXD200 receiver Connect to analogue or optical input on speakers, stereo or AV receiver.
Paired & unpaired mode By pairing, you lock your Audio Pro network from other peoples Audio Pro Wireless networks. In unpaired mode, the TXD200 and RXD200 will work with all Audio Pro Wireless products. HOW To Pair TXD200 with RXD200 Set units to same House Code: 1, 2, or 3. 1. Press Pair button on TXD200 for 2 seconds, LED flashes Green. It will now search for RXD200 units to pair with. 2. Press Pair button on RXD200 for 2 seconds, LED flashes Green. 3.
TROUBLESHOOTING No connection betwEen units When wireless connection is established on same channel, LED on both transmitter and receiver(s) will go blue. If no connection, LED goes red. Try this to ammend problem: - Set same channel (1, 2 , 3) is set on both TXD200 and RXD200. - RXD200 receiver is out of range from TXD200 transmitter. Try placing the units in closer proxemity. Wireless connection, but no sound - Make sure to choose correct source on receiving device.
