Operating instructions

16
OTHER IMPORTANT INFORMATION
Connecting the headphones.
Connect the headphones with a 3.5 mm [1/8 inch] ste-
reo plug to the HEADPHONES output on the side panel.
When the headphones are connected, the speaker out-
put turns off automatically. When the headphones are
connected, there is no audio output from the speakers.
Adjust the volume with the volume knob. Listening th-
rough the headphones at high volumes can be dange-
rous to one’s hearing.
NOTE!
Before disconnecting headphones, turn the volume
knob to minimum (VOL OO).
BASS, TREBLE and BALANCE settings will not affect
the headphones sound.
Connecting an audio source to LINE IN on the side
panel.
Connect an external audio source (such as an Mp3,
iPod player) to LINE IN on the side panel. Use a cable
with a 3.5 mm [1/8 inch] stereo plug. Select SIDE as
source using the SOURCE button on the front panel or
on the remote control.
Connecting an audio source to AUX on rear panel.
Connect an external audio source (such as a CD player,
TV, DVD, Mp3 player) to AUX on the rear panel. Use a
cable with PHONO plugs. Select AUX number as the
audio source using the SOURCE button on the front
panel or on the remote control.
Connecting a USB memory or Hard disc to USB.
Connect the USB memory stick or Hard Disc to the
USB side connector.
This unit can handle USB memory and portable Hard
Disc drives (2,5”). Bigger Desktop Hard Disc drives
need external power supply.
For easy access of the music files on the USB or Hard
Disc driver, place the music files on top in the root
menu.
Wireless ready
Stereo Zero can receive wireless audio signal with the
optional accessory Audio Pro RX-100. RX-100 is a USB
dongle that can receive audio signal sent from Audio
Pro TX-100 transmitter.
Connect the RX-100 USB dongle to the USB connector
(for power supply) and connect the enclosed 3,5 mm
audio cable to the SIDE input.
Select SIDE as source.
To learn more visit www.audiopro.com