Operating instructions

15
ADJUSTING THE SOUND
Adjusting the volume
Turn the volume knob clockwise (to the right) to
raise the volume or counter-clockwise (to the left)
to lower the volume.
The scale shown on the display ranges from 00-
40, that is, from VOL OO (minimum) to VOL 50
(maximum).
Always check the volume setting before an audio
source is turned on. Turn the volume knob all the
way down before unplugging headphones.
Example: display showing the volume at 20.
Note: Default volume setting when power on is
always 20.
Muting (Only possible with the remote control)
The volume can be turned off temporarily with the
muting function on the remote control. Press the
MUTE button on the remote control to turn the
audio off temporarily. During MUTING, the display
will blink. Press the MUTE button again to return
to the previous volume (Only possible from the re-
mote control). The muting also stops if the volume
knob setting is changed.
Adjusting the bass
Press the BASS button on the remote control.
BASS appears in the display. Press the + button
to increase bass or - button to decrease bass.
Example: bass set at +3.
Adjusting the treble
Press the TREBLE button on the remote con-
trol. TREBLE appears in the display. Press the +
button to increase treble or - button to decrease
ttreble.
Example: treble set at +2.
Adjusting the balance between the left and right
channel
Press the BALANCE button on the remote control.
BAL L__R appears in the display. Press the + but-
ton to increase RIGHT channel or - button to increase
LEFT channel.
Example: balance set to center
Example: Right channel increased 2 steps