Operating instructions

10
Connecting the speakers
Connect speaker cables according to the drawing below. Speaker cables are normally marked + and - (or with
different marks). Connect one end to the speakers terminals. Connect the other ends of the cables to the ampli-
fier, following directions 1-4 below. Make sure to connect + to + and - to -. This also applies to the connections
to the speakers.
Amplifier’s rear panel
4) Tighten
3) Insert the wire into the
speaker terminal
2) Open the speaker
terminal
1)Remove the sheath from
the end of the wire
Left speaker
Right speaker
Connecting the subwoofer (extra accessory)
An active subwoofer will substantially improve the bass reproduction. Connect a line cable between the SUB-
WOOFER OUTPUT and LINE IN input on the subwoofer. Generally, a line cable is delivered with a subwoofer.
+
-
+
-