STEREO TWO ace bass cd-receiver (Eng) OPERATING INSTRUCTIONS
CONTENTS 4 Before connecting to power source 5 Security 6 Controls and indicators 6 The front panel 8 The remote control 9 Connections on the rear panel 10 Installation 10 Connecting the speakers 10 Connecting a subwoofer 11 Using the remote control 11 Setting the clock 11 Connecting the FM and AM antennas 11 Connecting an external audio source 12 CD functions 12 Playing a CD 12 CD repeat 13 Tuner functions 13 Manual search of radio stations 13 Automatic search of radio stations 13 Dir
BEFORE CONNECTING TO POWER SOURCE Unpacking Carefully unpack the unit, making sure that all the accessories are included in the packaging (see below). Examine the receiver to make sure that it has not been damaged during transport. If your unit is damaged or it does not work, inform your dealer immediately. If the unit was delivered directly to you, contact the shipping company immediately.
SECURITY Power source This unit is intended for use with a 230 V AC power supply only. Connecting to a different power source may lead to accidents or fire and can damage the unit. Check the voltage of the power source before you connect this unit. Power cable This unit has a detachable power cable. Plug it into the appropriate outlet on the back panel. Make sure that the unit is completely turned off until all other connections have been completed.
CONTROLS AND INDICATORS HEAD UNIT Front panel 17 15 16 12 14 13 11 18 1 1) Power switch 2 3 4 5 6 6) Menu 7 8 9 10 Press this button to turn on the receiver, provided it Press to set the TIME and TIMER modes. See pages is in standby mode (indicated by the red LED on the 11 and 17. ace-bass indicator (#2 on the diagram). If it is not illuminated, then the receiver is turned off, in which case, 7) Display Operation indicators are displayed here.
CONTROLS AND INDICATORS 13) Play/Pause CD Press this button to play a CD. Make sure there is a CD in the tray (17). Push the Play button again to pause the CD. By pushing the Play button again, the CD will begin playing from the point at which it was paused. 14) Stop/Memory CD mode: Press the button to stop playing the CD. Tuner mode: Press the button to open the internal memory for radio pre-sets. 15) Tone/Skip/Balance/Preset Press this button to select the mode to be adjusted: BASS, TREBLE, S.
CONTROLS AND INDICATORS REMOTE CONTROL 1 2 4) Numerical buttons The numerical buttons 0-9 permit the user to select: CD mode: track number. Tuner mode: pre-set radio stations or numerical input of a radio frequency 3 5) Repeat/Preset FM CD mode: selection of repeat function. See separate section on page 12. Tuner mode: instant selection of a radio frequency. See separate section on page 13. 6) Display 4 Use this button to select display mode – clock or selected audio source.
CONTROLS AND INDICATORS HEAD UNIT Rear panel 1 2 11 10 3 9 8 7 1) Connecting the FM indoor antenna Connect the enclosed FM indoor antenna. Locate the wire where the reception will be optimal. NOTE: It is also possible to connect a central or outdoor antenna here; either one will provide better reception than the indoor antenna. 2) Connecting the AM antenna Connect the enclosed AM antenna. Place the ring as far from the main component, TV, and power cables as possible.
INSTALLATION Connecting the speakers Connect the enclosed speaker cables according to the figure below. One end to the speakers and the other ends to the amplifier, following the directions 1 – 4 below. Make sure to connect + to + and – to - . The enclosed speaker wires are 3 meter long. The speaker wires can be replaced with other brands and lengths.
INSTALLATION Using the remote control Connecting the FM indoor antenna Insert the AAA batteries included in the packaging into the battery opening on the back of the remote control. Make sure that the polarities (+ and -) are aligned correctly. Connect the FM indoor antenna plug to the output on the back panel. The remote control’s operating range (approximate) �� � �� � ��� Locate the other end where the reception is good. Connect a central or outdoor antenna here too.
CD FUNCTIONS Playing a CD CD Replay Press EJECT to open the CD tray. Place a CD in the tray with the label facing up. Press EJECT to close the tray. Press PLAY to listen to the first track. Shown on the display: (When HDCD is playin) This option can only be used with the remote control. The following functions are available: - Repeat a track - Repeat an entire CD - Repeat from point A to point B Begin playing the CD. Press the ---/REP button once in order to replay the current track.
TUNER FUNCTIONS Manual search of FM/AM radio stations Select TUNER as an audio source using the SOURCE button. Select FM-stereo, FM-mono or AM with the FM/AM button. On the remote control, use the INPUT and BAND buttons. Or Turn the TUNING knob to the right to search up on the radio dial or to the left to search down on the radio dial. (The manual search option is only available on the head unit). Tuner pre-sets A total of 80 FM and AM stations can be stored in memory.
RDS [RADIO DATA SYSTEM] FUNCTIONS RDS (Radio Data System) RDS is a system that sends information (digital data) for FM broadcasts together with the broadcast signal. Radio parts developed for RDS reception can convert these digital data for the display of program names, program types, current time, etc. Using RDS (Europe only) The following functions are available (in the following order): PS (Program Service Name) Displays the station name (PTY) Press the DISPLAY button to see the radio program genre.
RADIO FUNCTIONS - RDS RDS program types (PTY) Program type Shown on the display News Current affairs Information Sports Education Drama Culture Science Varied Pop music Rock music Easy-listening music Light music Classical music Other music Weather Finance Children Social issues Religion Call-in program Travel Leisure Jazz music Country music National music Oldies Folk music Documentary NEWS AFFAIRS INFO SPOR
ADJUSTING THE SOUND Adjusting the volume Turn the volume knob clockwise (to the right) to raise the volume or counter-clockwise (to the left) to lower the volume. The scale shown on the display ranges from 0040, that is, from VOL OO (minimum) to VOL MAX (maximum). Always check the volume setting before an audio source is turned on. Turn the volume knob all the way down before unplugging headphones. Playback without the tone settings Press the TONE/SKIP/BAL knob so S.DIRECT is displayed.
TIMER FUNCTIONS Timer The timer can be set for one event within a 24 hours period (ONCE) or for recurring events (EVERYDAY). The time settings for both are kept in the memory even if they are not activated. The timer settings will be erased if the main power switch is set to OFF or if there is a power failure. The timer functions can be programmed and adjusted in different menus. Here is the order of appearance.
OTHER IMPORTANT INFORMATION Connecting the headphones Connect the headphones with a 3.5 mm [1/8 inch] stereo plug to the PHONES output on the front panel. When the headphones are connected, the speaker output turns off automatically. When the headphones are connected, there is no audio output from the speakers. Adjust the volume with the volume knob. Listening through the headphones at high volumes can be dangerous to one’s hearing.
STEREO ONE ACE PLUS SPEAKERS Stereo Two ACE PLUS speakers These speakers are included in the packaging. They were designed and developed to be used exclusively with the Stereo Two CD receiver. These speakers can not be connected to another amplifier. The enclosed speaker cables can be replaced by another cable if other length is required. Thanks to Audio Pro’s patented ACE BASS technology, Stereo Two ACE PLUS, together with the Stereo Two CD receiver, offers a unique audio experience.
TROUBLESHOOTING If a unit does not function or perform as expected, the problem is not always a mechanical one. The solution may be found in the table below.
TECHNICAL DATA Audio section: Other: Output power: RMS: 20Hz-20kHz < 0,7% THD, 4 Ω............2 x 75W CD player Readable types .....................................CD, HDCD, CD-R: 8cm och 12 cm Dynamic output power: (IHF-202) With enclosed ace-plus speakers...2 x 175W AM/FM tuner with RDS Number of presets ...................................................80 presets (FM/AM together) Frequenzy response: ..................................................4Hz-103kHz (-3dB) Signal-to-noice ratio: ........
YOUR OWN NOTES: 22
Audio Pro AB Box 1015 S-251 10 Helsingborg Sweden www.audiopro.
