Specifications

PAIRING LV-HUB, ONLY WITH FUTURE LIVING SPEAKERS

By pairing, you lock your Audio Pro network from other near by Audio Pro Wireless

networks. Features like changing source in different rooms are available. Pairing fea-

ture is only available on newer Living speakers, not

LV1, LV2, LV2e, LV3 or LV-SUB.

PAIR YOUR LIVING SPEAKERS WITH LV-HUB TRANSMITTER

1. Press Pairing button on LV-HUB for 2 seconds. LED starts to flash Green.

2. Press and hold ZONE/PAIR button on Living speaker for 3 seconds.

LED starts to flash Green. (See manual for specific LV speaker.)

3. When LEDs on both transmitter and speaker goes to steady green, the system is

paired.

Note:

1. Pairing will not work with older Living speakers (LV1, LV2, LV2E, LV3 or LV-SUB).

2. To unpair system (all speakers in same volume zone will be unpaired):

- Disconnect LV-HUB from power.

- While pressing the pairing button, reconnect LV-HUB to power, and hold pairing but-

ton for 6 seconds. All speakers with same House Code will now be unpaired.

Rear on LV-HUB

On LV speakers