Owner`s manual

Candela vacuum tube line preamplifier
Specifications
Candela:
model specifications:
● “Current Source Loaded Grounded Cathode Amplifier" based design
● Vacuum Tube single ended stages
● Class-A single ended configuration
● Zero feedback
● Low output impedance
● Low current design
● Relay-controlled input selector
● Power supply rectification using ultra fast-soft recovery “Stealth” Diodes
● (2) ECC82/12AU7 tubes
● 14dB gain
● Frequency Response 10Hz - 500kHz
● RCA type inputs & output
● 4 line inputs
● 1 input can be configured for HT bypass *
● Input Impedance >100 kOhm
● 1 pair preamplifier output
● 2nd pair of pre outs optional *
● Preamplifier output impedance: 10 kOhm
● High quality Alps potentiometer
● Remote control volume option available *
● >16 lbs weight / >7.25 kg
● Dimensions: 18 width x 8 deep x 4 height (in) / 45.7 width x 20.3 deep x 10.2 height (cm)