Owner`s manual

11
Hookup
The Force has three RCA, line-level inputs. Speaker Level Converters are also provided.
The rest of your system will determine the input(s) and adapters that you use. We have included
some layouts of the most common hookup variations. There are so many types of pre-amps,
surround sound receivers and processors that you may need to refer to your owner’s manual for
specifics.
Speaker Level Converter
Y Adapter
If your system does not have subwoofer or pre-amp (line-level) outputs you will need to use
the Speaker-Level Converters. Connect the Speaker Level Converters to the Force Inputs. Hook up
your speaker cable from the same output terminals you are using for your main speakers. Connect
the speaker cable and the Speaker Level Converters. Connect the same polarity as your main
speakers, red to red, black to black. The high input impedance of the Force will not use any power
from your receiver or amp.
Positive to amplifier speaker output
Negative to amplifier speaker output
Use one adapter and RCA Interconnect
per channel (Left, Right)
Use one adapter per channel (Left, Right)
RCA Shielded
Interconnect
To Main Amp
To Pre-amp output