User manual

The LED-Display shows the operational readiness
of the Mixer Amplifier.
LED - Display
With this switch you turn on the apparat.
Position I = apparat is on
Position 0 = apparat is off
After turning the machine on, the LED is shining
blue. Before turning the machine on, the Master
controller should be set to a low volume.
9
EN
ic audioic audio
In addition to the normal 100V line output you can
select 6 Zones by using the push buttons on the
front panel.
Device Functions
- Front side -
LED - Display
ON/OFF - Switch
Zoning
ON/OFF - Switch
Zone Button No.2
Zone Button No.1
Zone Button No.3
Zone Button No.4
Zone Button No.5
Zone Button No.6