User manual

The equipment provides an auxiliary input which
may be used for connecting of other signal
sources such as a CD- or Cassette player. A slide
switch is located on the front panel for selection of
Aux and CD. The line level control operates on
each of the input sources. To operate select the
desired music source using the slide switch and
turn the "Line" control clockwise to increase the
volume or anticlockwise to reduce the volume.
The AUX/CD input sockets are standard RCA
phono sockets. Two sockets are supplied and
these are linked together internally. This allows
stereo signal source to be used without the need
to obtain a special lead. However you may wish to
check with the manufacturer of the signal source
to ensure that no damage will result if the left and
right output channels are working in parallel
operation.
Tape
19
EN
ic audio
LINE IN (CD/AUX)
20060 651
Device Functions
- Rearside -