User manual

The amplifier is factory set at 230 V(AC) mains
voltage. The Mains Selector is at the rearside of
the Mixer Amplifier.
You can set the switch to 115V if neccessary by
pushing the slide switch from right to left. Please
disconnect the mains cable before changing the
voltage supply.
Ensure yourself that the device is set to the local
mains voltage before you connect it.
You can also drive the device with 24V(AC).
This is useful in case your mains connection is
broken down and you can bypass this with an
uninteruptible power supply (UPS).
The device is then automatically driven by external
battery power, regardless to the position of the
ON/OFF-switch.
Electrical stability of the system is increased by
earthing the case.
15
EN
ic audio
20060 651
20060 651
Device Functions
- Rearside -
115V and 230V Mains Connection
Mains Selector
Mains Supply
24V-Battery Supply
24V-Battery Supply / UPS Connection