User Manual

SWAM Woodwinds v2.9.0 - User Manual – rev. 1

3. Exit

SNM

by releasing the sus pedal (or send a value below 64 via the CC assigned for

this task).

For example: If you need an Arabic scale in C and want to detune all E and B notes -50 cents, the

steps would be:

Press and hold the sus pedal

Briefly press E1 and B1

Release the sus pedal

The affected notes and how much they have been detuned will be displayed in the instrument GUI:

How to reset and modify the current microtuning

As soon as you re-enter

SNM

(by pressing the sus pedal or sending a value greater than 64 via the

CC you have assigned for this task), the current detuning of all the notes will be cancelled and the

Microtuning display in the instrument GUI will be reset to zero:

Keeping the pedal pressed, you can immediately detune a new set of notes by pressing the

appropriate key switches (see 2. above).

This allows you to create selective microtunings “on the fly”.

Applying microtuning through SysEx

It's possible to control Microtuning through MIDI SysEx messages. SWAM responds to two

protocols: Custom protocol and Yamaha PSR A3000 arranger protocol

Custom Protocol