User's Manual

- 5 -
A10-RX User Guide
Connectors, Controls Description
2
1
4
3
7
6
5
Figure 1: A10-RX
1 -Antenna Socket
SMA connector, 50 ohm, connects to includ-
ed 1/4-wave whip antenna.
2 -Channel Power LED
• Illuminates blue when the channel’s
receiver circuitry is powered and opera-
tional.
• Blue LED ashes when paired transmit-
ter’s battery is critically low or depleted.
3 -Green/Red RF Status LEDs
• Indicates signal strength of received RF.
• Green LED illuminates solid green with
good RF reception. It starts to icker
green as the received RF signal quality
deteriorates.
• Red LED illuminates solid red when
the receiver loses lock to the transmitter
signal due to weak signal or transmitter
being turned off.
• Both green and red LEDs are off at the
fringe of reception.
• Both green and red LEDs are on when RF
overload is ocurring.
4 -Left Button
Moves the selection in menu to the left, or
decrements values.
5 -Menu/Select Button
Enters the menu selection. Also used to select
options in the menu.
6 -Right Button
Moves the selection in the menu to the right,
or increments values.
7 -Antenna Socket
SMA connector, 50 ohm, connects to includ-
ed 1/4-wave whip antenna.
8 -Display
OLED screen. The screen can be set to turn
off after a period of inactivity from the Selec-
tion menu (Main > Settings > Screensaver).