User's Manual

- 19 -
A10-RX User Guide
6. Click OK when Firmware Update is complete.
Converting Between XLR and SL Mounts
The A10-RX receiver is modular in design. With the correct accessories—either the A-SL or
the A-XLR adapters—the A10-RX-SL slot receiver and A10-RX-XLR cabled receiver can be
converted between each type.
• The A-SL accessory is a 25-Pin D-Type Uni/Superslot adapter, and comes with the A-PLATE
spacer.
• The A-XLR accessory is an XLR and power cable adapter.
To convert from an A10-RX-SL to an A10-RX-XLR:
1. Remove the four perimeter screws. Do not remove the two screws on either side of the 25-
pin D-Type connector.
2. Remove the A-SL accessory.