User's Manual

- 10 -
A10-RX User Guide
Settings Sub-Menu
ª All setting are Global.
Selections Icon Description Options
Exit
Returns to the main menu
Screen Brightness
Sets the brightness of the OLED screen. Five increments, 1–5, 5 is brightest
Screensaver
Sets the duration, in seconds, how long the screen
remains on after a button press. Off keeps the screen
on continuously with no screensaver.
• Off - display remains on when unit
is powered
• 5 sec
• 30 sec
• 120 sec
Orientation
Sets the operating orientation of the menu screen and
LEDs. The A10-RX can be used in an orientation with
the buttons below the screen (normal), or with the
buttons to the top (ipped).
• Normal
• Flipped
LEDs
When set to On the LEDs remain illuminated. Off
deactivates the LEDs.
• On
• Off
User Groups
Sets whether receiver utilizes user groups (User) or
manual frequency selection (Factory).
• User
• Factory
TV Ch Map
Selects the TV channel spacing in MHz to ensure
channel selection corresponds to a specic geographic
region. See frequency chart.
• X – 6 MHz
• Y – 7 MHz
• Z – 8 MHz
System Sub-Menu
ª All settings are Global.
Selections Icon Description Options
Exit
Returns the main menu
Power
Turns power to the RF receiver for each of the two channels
on and off.
• 1 - channel 1 only
• 1 and 2 - both channel 1 and 2
• 2 - channel 2 only
• Off - receiver circuits off
Restore
The restore function allows the user to reset the A10-RX to
the factory default settings.
ª Restore sets the TV Channel Map to region Z. Select the
current region in your locality before proceeding.
Info
Shows numerous attributes of the transmitter. • Serial Number
• Firmware Revision
• Frequency Band