Specifications

Audio International, Inc. ASP-101-02-x Installation & Operation
Document #540183, Rev IR, 6/2000 Page 6 of 14
3.0 Installation
3.1 Prior to Installation
The ASP-101-02-x is a simple module to install. Prior to installation the
following items should be considered:
3.1.1 During the design and layout of the aircraft cabin, careful
consideration of the location of this and all other audio modules is
necessary. Some of the items to consider include:
• Space
• Proximity to other devices (i.e. source equipment)
• Available power supply
• Length of cable runs
• Environmental conditions (temperature, humidity, etc.)
• Location of other aircraft systems (i.e. oxygen delivery)
• Access for service repair (if applicable)
• Convenience for user interface (if applicable)
3.1.2 The module shall be installed to conform to the standards
designated by the customer, installing agency, or other specified
requirements.
3.1.3 Select a mounting location for the ASP-101-02-x prior to
installation. User access is NOT a consideration when placing unit
into the suitable mounting location. Refer to Section 7.0 for
dimensions and attachment points. The unit shall be bonded to the
aircraft frame with a bonding resistance of less than 0.001-ohms.
3.2 Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the ASP-101-02-x.
Verify that all components have been included in the package per
the packing list. Inspect the unit for shipping damage.
3.2.2 If damage has occurred during shipping, a claim should be filed
with Audio International within 24 hours and a Return Request
Authorization Number shall be obtained from AI. Refer to the front
cover of this manual for address and telephone number of Audio
International, Inc. Repackage the unit in its original packaging
materials and return it to AI following instructions given by the AI
representative. If no return is necessary, retain the packing list and
the packing materials for storage.