Specifications

Audio International, Inc. A/V-9691-01(-02)-x Installation & Operation Manual
Document # 540250, Rev D, 07/2004
Page 31 of 33
5.3 Troubleshooting Chart
Problem Possible Cause Solution
Audio is not present
in the speakers
and/or headphones.
 Unit is not properly
connected to the audio
sources(s).
 Circuit breaker has been
tripped.
 There has been a power
failure while the
respective entertainment
unit was operating.
 PA microphone key is
being pressed or briefer
unit is activated.
• Ensure the unit has been properly
connected to the audio source(s).
• Reset circuit breaker.
• Refer to the entertainment unit
operation manual to re-activate
the corresponding unit.
• PA or briefer audio is being used.
Entertainment audio will return to
previous selection when the PA
key is released or the briefer unit
is de-activated.
Video is not present
on the monitor.
 Unit is improperly
connected to the video
source.
• Verify unit is properly connected to
the video source.
Audio or video
equipment is not
operating properly.
 Audio or video unit is
improperly connected to
the RS-485 data bus.
 Device ID pins
improperly connected.
 External equipment has
been incorrectly installed.
• Check data bus and the
audio/video unit for proper
connections.
• Verify proper device ID pin
connections on units.
• Verify installation per individual
instruction materials.
6.0 Specifications
Physical Specifications
Housing Anodized Aluminum
Weight
8.2 lb / 3.7 kg
Dimensions*
(l x w x h)
8.72" x 13.86" x 3.50"
22.1 cm x 35.2 cm x 8.89 cm
*All dimensions given with ± 0.03" tolerance.