Specifications

Audio International, Inc. A/V-9691-01(-02)-x Installation & Operation Manual
Document # 540250, Rev D, 07/2004
Page 11 of 33
3.0 Installation
3.1 Prior to Installation
The A/V-9691-01(-02)-x is a simple module to install. Prior to installation,
select a mounting location for the distribution unit. Mounting locations
may include inside a credenza, an entertainment cabinet, a radio rack, or
similar area. Refer to Section 7.0, Reference Drawings, for unit
dimensions, mounting locations, and connector locations. The unit should
be bonded to the aircraft frame.
Prior to installation the following items should be considered:
3.1.1 During the design and layout of the aircraft cabin, careful
consideration of the location of this and all other audio/video
modules is necessary. Some of the items to consider include:
• Space
• Proximity to other devices (i.e. source equipment)
• Available power supply
• Length of cable runs
• Environmental conditions (temperature, humidity, etc.)
• Location of other aircraft systems (i.e. oxygen delivery)
• Access for service repair
• Convenience for user interface
3.1.2 The A/V-9691-01(-02)-x shall be installed to conform to the
standards designated by the customer, installing agency, and
existing conditions as to the unit location and type of installation.
3.2 Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the A/V-9691-01(-02)-x.
Verify that all components have been included in the package per
the packing list. Inspect the unit for shipping damage.
3.2.2 If damage has occurred during shipping, a claim should be filed
with Audio International WITHIN 24 hours and a Return Request
Authorization Number shall be obtained from AI by contacting the
Repair Department at 501.801.0640. Repackage the unit in its
original packaging materials and return it to AI following instructions
given by the AI representative. Refer to the front cover of this
manual for address. If no return is necessary, retain the packing
list and the packing materials for storage.