Installation and Operation Manual DVD-024-0x-x Digital Video Disc Player Document # 540184 a DeCrane Aircraft Company 7300 Industry Drive, North Little Rock, AR 72117 Phone: 501-955-2929 Fax: 501-955-2988 www.audiointl.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Document Revision History Rev. Level Date Description IR 03/2000 Initial Release A 08/2000 ECN #5272 A1 10/2000 Section 6.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Table of Contents Section Description I Page 1.0 2.0 3.0 4.0 5.0 6.0 7.0 General Information……………………………………………… Introduction…………………………………………………………. Purpose of the Equipment………………………………………… Operational Features……………………………………………… Optional Equipment……………………………………………….. Technical Specifications………………………………………….. Application………………………………………………………….. Video/Audio Disc Care……………………………………………. 3 3 3 4 4 4 5 6 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual SECTION I – GENERAL INFORMATION 1.0 Introduction This manual contains information for the proper installation and operation of Audio International’s (AI) Digital Video Disc Player, Model # DVD-024-0x-x. The “-x” suffix in the model number designates the type of connector utilized; “-1” = Positronic and “-2” = D-Subminiature. Also included are mechanical and electrical characteristics of the unit. 2.0 Purpose of the Equipment 2.
Audio International, Inc. 3.
Audio International, Inc. 6.0 DVD-024-0x-x Installation & Operation Manual Application 6.1 Introduction The DVD-024-0x-x operates between +18 and +32 VDC with a power consumption of less than 1A at +28 VDC. The unit is capable of withstanding power interruptions in duration of 200 msec or less. DVD-024-0x-x’s video output has nominal impedance of 75 Ω with an output level rating of 1 V(p-p) and is not capable of level adjustment.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual 6.2.3 The unit can also be configured for Touch Screen or remote panel control (i.e. entertainment control panels). The panels are on AI’s proprietary RS-485 digital data bus system and configured to control the operational features of the DVD-024-0x-x. 7.0 Video/Audio Disc Care 7.1 When playing a disc for the first time, check that there are no burrs stuck in the center hole of the disc. 7.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual SECTION II - INSTALLATION 1.0 2.0 Prior to Installation 1.1 During the design and layout of the aircraft cabin, careful consideration of the location of this and all other audio/visual modules is necessary. Some of the items to be considered include: • Space • Available power supply • Environmental conditions (temperature, humidity, etc.) • Length of cable runs • Location of other aircraft systems (oxygen delivery) 1.
Audio International, Inc. 2.2 3.0 DVD-024-0x-x Installation & Operation Manual If damage has occurred during shipping, a claim should be filed with Audio International WITHIN 24 hours and a Return Request Authorization Number shall be obtained from AI. Refer to the front cover of this manual for address and telephone number of Audio International, Inc. Repackage the unit in its original packaging materials and return it to AI following instructions given by the AI representative.
Audio International, Inc. 3.13 4.0 DVD-024-0x-x Installation & Operation Manual ESD (Electro Static Discharge) guidelines shall be followed. Wiring Requirements 4.1 Introduction The installing agency shall supply and fabricate all external cables. The length and routing of external cables shall be carefully studied and planned before attempting installation of the equipment. Allow adequate space for installation of cable and connectors.
Audio International, Inc. 4.4 DVD-024-0x-x Installation & Operation Manual AI’s Proprietary RS-485 Data Bus 4.4.1 The DVD-024-0x-x is designed to interface with other Audio International equipment via AI’s proprietary RS-485 serial data bus. The data bus shall be implemented using a twisted shielded pair cable in accordance with the standard military specification of MIL-DTL-27500 or equivalent. The wire size for the conductors in this cable shall be 22 AWG, MINIMUM.
Audio International, Inc. 6.0 DVD-024-0x-x Installation & Operation Manual Electrical Characteristics 6.
Audio International, Inc. 6.7 6.8 DVD-024-0x-x Installation & Operation Manual Mating Connector Information Model # DVD-024-0x-1 Connector Designator P1 DVD-024-0x-2 P1 BNC1 Video Input BNC1 Optical Digital Audio Output P2 Pinout Assignment and Descriptions DVD-024-01(-03)-x Pin # Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7.
Audio International, Inc. 8.0 DVD-024-0x-x Installation & Operation Manual Troubleshooting 8.1 General Troubleshooting Procedures • • • • • 8.2 Confirm that +28 VDC power is applied to the proper pins on the unit. Use a voltmeter to verify correct level. Reset by removing power from the unit for at least one (1) minute and then reapply power. Recheck all connections to the unit for security. Check all harness runs for possible pinching. Recheck all pinouts for application accuracy.
Audio International, Inc. 9.0 DVD-024-0x-x Installation & Operation Manual Reference Drawings The following diagrams show the unit dimensions, mounting locations, and connector locations for the DVD-024-0x-x.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual SECTION III – OPERATION 1.0 General Information 1.1 The DVD-024-0x-x can be operated via front panel ‘buttons’ or optionally controlled by infrared remote or AI’s touch screen panel. Digital codes allow the unit to interface with an infrared handheld remote via an infrared receiver (IFR-9A or IFR-485). Multiple units can be controlled independently using available programming pins. 1.
Audio International, Inc. 2.0 DVD-024-0x-x Installation & Operation Manual FRONT PANEL CONTROLS ILLUSTRATION OF DVD-024-0x-x FRONT PANEL The names and functions of the DVD-024-0x-x are as follows: Open / Close button – Press to eject a disc from the disc tray or to load a disc onto the disc tray. Play button – From Main Menu, pressing PLAY selects the highlighted choice. Pressing PLAY will begin playback of a CD.
Audio International, Inc. 3.0 4.0 DVD-024-0x-x Installation & Operation Manual Basic Playback 3.1 To open the disc tray, press the OPEN / CLOSE button. The disc tray will slide forward. 3.2 To play a DVD or CD disc, place the desired disc on the disc tray with the playback side down. Since the DVD will accept either an 8 cm or 12 cm disc, ensure that the disc is placed on the correct guide. Press the OPEN / CLOSE button. When the disc tray closes, the CD or DVD will be loaded immediately.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual 4.1.3 Program codes are not lost when batteries are removed or replaced. However, codes may be lost if power is not restored to the remote control within an hour (CAUTION: FACTORY CODES ARE NOT LOST IF BATTERIES ARE REPLACED WITHIN THE ONE (1) HOUR TIME FRAME. IF ONLY ONE (1) BATTERY IS REMOVED, THEN THE ONE (1) HOUR TIME FRAME STILL APPLIES.). To avoid corrosion, replace dead batteries immediately.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Ø To advance a DVD frame by frame, press PAUSE / STEP during still mode. Each time the button is pressed, the picture advances one (1) frame. To resume normal playback, press PLAY. Ø To stop and then resume playback from the same location, press STOP at the location desired. Press PLAY to resume playback.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Ø To select a subtitle language, press SUBTITLE CHANGE during playback and the current subtitle language appears. Continue to press SUBTITLE CHANGE until the desired language is displayed. It is also possible to change subtitles by selecting the SUBTITLE CHANGE option from the main menu and using the arrow keys to select the desired language. 4.2.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual 4.2.5 Function Setup-Customizing the Function Settings 4.2.5.1 Displaying the SET UP MENU screen: Ø The SET UP MENU may be used to select DVD menu default selections regardless of DVD configuration. Press SETUP during the stop mode. The SET UP MENU screen will appear. The SET UP MENU screen disappears if the SETUP button is pressed while it is displayed or if DONE from the SET UP MENU screen is selected.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Ø When DISC MENU is selected, choose a preferred language by pressing one (1) of the arrow buttons and then press ENTER. To change the language while a disc is inserted, press the MENU button to display the disc menu. Press the SETUP button. If the disc menu has only one (1) language, the display does not appear. Press the SETUP button repeatedly until the desired language is displayed. Press the ENTER button.
Audio International, Inc. DVD-024-0x-x Installation & Operation Manual Ø The Background may be changed from Blue to Black. Use the arrow keys to choose the desired background and press ENTER to select. Ø The Parental Control option may be used to lock out disks from certain countries or those of certain rating levels (“PG-13” or “R” rated movies, for example). 4.2.5.4 Audio Settings: Ø Digital Out- It is possible to change the Audio format using the DIGITAL OUT option.
