User Guide
FEATURES
SPECIFICATIONS
Enclosure Features
• High Current Binding Posts
• Constructed with 1/2" MDF
• Covered with High Density Carpet
• Wired Exclusively with Rockford Accessories
Specifications subject to change without notice
Speaker Features - P3S - DVC (Dual Voice Coil)
• High modulus closed conical cone and ABS/Acrylic dustcap assembly geometry.
• Kevlar fiber reinforced semi-pressed paper cone.
• Tear & fatigue resistant poly-cotton spider.
• High density compressed half-roll sealed poly-foam surround.
• High temp voice coil with spun-laced Nomex™ insulating reinforcement collar.
• Optimized motor magnetics with extended pole and bumped vented backplate.
• Fatigue resistant and reduced strain "stitched on" flexible lead wire design.
• Multi-point high-temp/high-strength neck joint bonding technique.
• Rigid die-cast aluminum low profile frame.
• Custom insulated/isolated compression input terminal assembly.
• Proprietary spider venting/cooling technique.
P3L-S10 (Single 10" DVC)
Nominal Impedance (Ohms) 4
Power Handling (Watts-RMS/Peak) 300 / 600
Internal Box Volume (ft
3
/liter) 0.40 (11.33L)
Overall Dimensions (HxWxD) 13.5” x 19.0” x 5.25” – 3.25”
(cm) (34.29 x 48.26 x 13.34 – 8.25)
bottom – top
P3L-S12 (Single 12" DVC)
Nominal Impedance (Ohms) 4
Power Handling (Watts-RMS/Peak) 400 / 800
Internal Box Volume (ft
3
/liter) 0.60 (16.99L)
Overall Dimensions (HxWxD) 13.5” x 27.375” x 5.25” – 3.25”
(cm) (34.29 x 69.53 x 13.34 – 8.25)
bottom – top
High-temp voice coil with spun-laced Nomex™ re-inforcement collar
.
Vented spider cavity.
Tear and fatigue resistant
poly-cotton spider.
High density compressed
half-roll sealed
poly-foam surround
Optimized motor magnetics
with extended pole piece.
Rigid die-cast aluminum low profile frame.
Custom insulated 10-AWG
nickel plated push terminals.
Kevlar fiber reinforced semi-pressed paper cone
and ABS/Acrylic dustcap assembly.
Decorative aluminum trim ring.