User Guide

0dB
- 2dB
- 4dB
- 6dB
- 9dB
JP4JP1
JP2
JP3
L2
L1
IW+ OW+ IT+ OT+
FACTORY SETTINGS
The MX6.2C Crossover has a basic Factory Setting:
On POS.5 to L2 for lower Mid-Frequency-Level, on POS.6 both Jumpers (JP2 and JP3) sticked in
for the Operation with only one Stereo-Amplifier and on POS.7 to “0dB”-Level Adjustment.
If you want to change the Factory Settings, follow the instructions below:
MAXXIMUS SERIES
1. Remove the top cover by unscrewing POS. 1- 4.
2. Set the switch on JP1 (POS.5) to L1 for louder Mid-Frequency-Level.
3. Remove the switches on JP2 and JP3 (POS.6) to use a second Stereo-Amp (Bi-Amping) for the tweeters.
4. Change the Level-Adjustement (0dB, -2dB, -4dB, -6dB or -9dB) by replacing the Jumper JP4 (on POS. 7)
to the desired level.
POS.1-4
(Top cover mounting)
MX6.2C CROSSOVER SET-UP
ENGLISH
POS.5
(Mid
range)
POS.7
(High range)
POS.6
(Bi-Amping)