User Guide

25
26
SPECIFICATIONS|ENG
21
MODELS
CHANNELS
CIRCUIT
OUTPUT POWER RMS 13,8 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 1 Ohms
OUTPUT POWER MAX. 13,8 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 1 Ohms
Damping Factor
Signal-to-Noise Ratio
THD&N
Input Sensitivity
Input Impedance
FILTER
Operation Mode
Various Lowpassfilter
Bass Boost @ 50 Hz
Subsonicfilter
Phase shift
Master/SlaveLink Mode
Remote Bass Level Controller
Slave In / Master Out (RCA)
Fuse Ratings
Dimensions
Width x Height x Length
Technical specifications are subject to change! Errors are reserved!
For damages on the vehicle and the device, caused by handling errors of the device, we can’t assume liability.
All HiFonics Amplifiers are tagged with a individual serialnumber, which will be registerd for statistic and service conditional
purposes.
All HiFonics Amplifiers are tagged with a CE-Certification Mark. Thereby these devices are ceritified for a use inside vehicles
inside the European Union (EU).
WARRANTY DISCLAIMER
The limited warranty comply with legal regulations. Failures or damages caused by overload, improper use or by using the
product for competitions are not covered by the warranty.
Please return the defective product only with a valid proof of purchase and a detailed malfunction description.
MERCURY I
1
CLASS D
Digital
1 x 350
1 x 550
1 x 800
1 x 700
1 x 1100
1 x 1600
>200
>90 dB
<0,05%
6 - 0.2 V
47 kOhm
Master - Slave
40 - 150 Hz
0 - 12 dB
15 - 55 Hz
0 - 180°
•
•
•
1 x 80 A Maxi-Fuse
205 x 45 x 278 mm