USER MANUAL

page 8
AutoMode: Some cars have
unusual signals on their speaker
leads and will not be read by the
AutoMode circuit. When this oc-
curs you can manually turn off the
AutoMode function. This is done
by moving the internal AutoMode
jumper to “Defeat”. In this mode,
you will need signal on the Chan-
nel 4 inputs to output signals on
the output.
Figure 3: Inside view of LC8i
LC8i Block Diagram
Installing Your LC8i
By this time we are sure that you are chomping at the bit to install your
LC8i. Everything you have read up to this point, has served to educate
you on the operations of LC8i. Therefore if you are still with us we rec-
ommend you read the following sections very carefully.