USER MANUAL

page 11
Interfacing with factory-installed radio
Figure 6: LC8i system using summing functions plus active equalization and
crossover
Figure 7: 5.1 factory surround system
Speaker-Level Inputs
The LC8i is designed to accept an amplied, speaker-level signal from
a factory source unit or amplier. You will want to refer to a factory
service manual or wiring-harness schematic to determine which wires are
the speaker wires for your system. This information is also available on
several car audio web sites for a small fee. If you are unsure which wires
are the speaker wires, it is recommended you look at the color of the
speaker wire connected to the speakers and follow them back to the fac-
tory source or amplier. Connect the speaker wires to the Speaker-Level