SALES NOTE

System Diagrams
LC8i S A L E S N O T E
Key Features of the LC8i
™
Performance Signal Processor
System #1 - Basic LC8i system
System #2 -LC8i system using summing functions plus active equalization and crossover
System #3 - 5.1 factory surround system
AutoMode Inputs(tm)- Some factory systems have a limited amount of output
channels. The LC8i is equipped with Selectable AutoMode inputs that takes the
Channel 3 signal and automatically feeds it to the Channel 4 output, if there is no
signal present on the Channel 4 input.
Speaker Level Inputs -
The LC8i can handle up
to 400 watts of power
per channel.
Selectable GTO Signal Sense - Once the GTO input of the
LC8i detects a speaker-level signal on the Main Inputs, it
powers up. When the speaker-level signal goes away, your
LC8i will automatically turn off.
Level Matching Controls - Allows the user to adjust
the outputs on the LC8i independently to help insure
proper level matching throughout the entire system.
Eight Output Channels - Eight output
channels that can either run independently,
or be summed together internally.
Channel Summing - The LC8i has internal
jumpers that allow the installer to sum selected
channels into the main channels. This is
especially useful for factory-installed systems
with actively crossed-over speaker systems.
LEDs let the user know which channels are being
summed into the Main Output.
12 Volt Output Trigger -
Most factory radios do not supply a remote
turn on wire. The LC8i gives you a remote turn
on lead for triggering external amplifiers and/
or processors.
Aux Level Control -
Allows the user to
properly match the
level of the Aux input
to the level of the
Main input.
Aux Input - Allows
the user to plug in an
iPod, Sat radio, or
other input source
and have volume
control with included
remote level control
Remote Level Control - Controls both the
subwoofer output level and the auxiliary input
volume, via the included dash control knob.
The knob also switches between Main and
Auxiliary input sources.
Summing LEDs