USER MANUAL
AccuBASS™ Controls: The threshold and level controls let
you determine when the AccuBASS™ circuit activates and the
level of bass correction desired. More info on page 8.
Ground: Connect to a good, veried chassis ground. Warn-
ing: factory radio ground wires already have multiple devices con-
nected to them and are not recommended.
+12V Power: Connect to a good source of 12-volt power.
Make sure you install the proper size fuse on the power wire near
the power source (i.e. battery) so that the power wire is protected
in case of a short to ground or an installation mishap.
page 6