USER MANUAL
Key features of the LC7i
•
AccuBASS™ bass compensation corrects the bass roll-off in factory
•
systems
• Speaker-level inputs can accept 400 watts per channel
• Six input and output channels!
• Internal channel summing eliminates factory crossover settings
• AutoMode turns 2 inputs into 3 outputs
• GTO™ - signal sensing turns the LC7i on automatically
•
12 volt 1 amp remote output to power up processors and ampliers
• Level matching controls
• Compact chassis for easy installation
• Recyclable cardboard box for easy storage or emergency
• heating needs
• Optional dash control (ACR-1) for remote level adjustment
• Bulletproof 5-year warranty (when installed
by an authorized AudioControl dealer)
Quick Install Guide
Since some of you high energy enthusiasts will want to install
your LC7i on your own, we offer a few reminders in the following
short section to speed up your installation. You should also refer to
diagrams on page 9 as guidelines.
1. Physically mount the LC7i in a location that keeps it away
from soda spills, food crumbs, and curious ngers. Select a loca-
tion that allows you access to the top panel controls.
2. The LC7i needs to be installed in the signal path between
your factory source unit (or factory amplier) and after-market
amplier(s) and/or processor(s). Do not connect the LC7i between
the factory head unit and the factory amplier. Locate the ampli-
ed speaker wires that are coming from your factory source unit
page 2