USER MANUAL
----------------------------------------------- 7 -----------------------------------------------
Quick Installation Information
For those of you who are short on me but high on ambion, we oer
the following secon to speed up your installaon of the LC6i:
1. Physically mount the LC6i in a locaon that keeps it away from
soda spills, food crumbs, and the curious ngers of those you have
wronged. You will want to select a locaon that allows you access
to the level controls. In many cases you can nd factory speaker
leads in the rear of the vehicle that are easy to access.
2. The LC6i needs to be installed in the signal path between your OEM
source unit or factory-installed amplier(s) and an aermarket
external amplier and/or processor(s). Locate the speaker wires
that are coming from your factory source unit and/or amplier and
connect them to the speaker-level inputs on your LC6i.
3. Connect the Output RCA connectors to cables that run to your
aermarket external signal processors and/or ampliers. If this
is not obvious to you, quickly pack up your LC6i and run to your
nearest authorized AudioControl dealer to have them perform the
installaon. You will thank us later.
4. Connect +12V power, ground, and remote turn-on (if applicable).
5. Level match your LC6i to your source and ampliers.
Note: You will want to turn the gains DOWN on your aermarket ampli-
ers to maximize your systems performance and minimize any HISS.
The example on the next page shows the use of the LC6i with an
AudioControl mul-channel power amplier.