USER MANUAL
-----------------------------------------------27 ----------------------------------------------
Low Output: Depending on the design of your factory-installed system,
you may be connecng to a pre-amp signal instead of a speaker-level
signal. Since the LC6i is a line output converter, you may need to turn
up the gains on the LC6i or consider adding a pre-amp line driver like
the AudioControl Matrix to increase the signal level to your aermarket
ampliers.
Maximized LED Does Not Light Up: If this LED does not come on but
your music sounds ne, don’t panic! Normal operaon for this LED is
for it to only icker at higher levels and remain OFF at lower levels. It
is only there to indicate when the pre-amp signal level in your LC6i is
approaching the maximum level (a.k.a. “clipping”.) If it comes on…and
stays on even without music, then you can panic.
If you like the LC6i, then you’ll love…
The EQS six-channel equalizer, is the perfect trunk mount processor
for those of you who want to improve the sound and detail of your
vehicle. Less than ideal factory speaker locaons can make even the
best speaker systems cry out for help. The equalizaon controls on the
EQS provide you with an ideal amount of tone control to tame even the
most challenging acouscal situaons.