SALES NOTE

Why does the LC6i have summable outputs?
Today, more than ever, OEM systems are actively
crossing over speaker signals inside the factory
amplifier. They do this because the factory speak-
ers are not very dynamic and they need to limit the
frequencies that are played through each individual
speaker. When aftermarket systems are installed you
need the ability to combine or ”sum“ multiple crossed
over signals back together. The AudioControl LC6i
incorporates a unique internal summing circuit that
will allow you to input several different signals and
get one complete, full range, high quality pre-amp
signal. There is no need to have multiple adapters.
The AudioControl LC6i is your one box solution for all
you OEM Headaches.
Why do AudioControl Line Output Converters work so well?
The LC6i has high-impedance (20K Ohms!!) speaker-level inputs that accept signals from factory installed amplifiers. Yes, Even Bose.
The AudioControl LC6i will work with most factory installed audio systems and give you high-quality, level matched, pre-amp signal via
standard RCA connectors. This will allow you to add high quality aftermarket amplifiers and processors while keeping the
convenienceĐ
converters, the LC6i gives you the brilliant sound quality that AudioControl has been providing for over 25 years.
making good sound better
®
22410 70th Avenue West • Mountlake Terrace, WA 98043 USA
Phone [phone] • Fax [phone] • audiocontrol.com
BLOCK DIAGRAM
Using an RTA to measure the Summed Response
SPECIFICATIONS
All specifications are measured at 14.4 VDC (standard automotive voltage).
As technology advances, AudioControl reserves the right to continuously
change our specifications, like our Pacific Northwest weather although we
are working on changing that.
Maximum speaker-level input . . . . . . . . . . . . . . . . . 400 watts @ 4 ohms
Maximum output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5Vrms
Output gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +/-12 dB
Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Hz-22kHz
Total harmonic distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01%
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Kohms
Power supply . . . . . . . . . . . . . . . . . . . . . . High headroom PWM switching
Power draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200mA
Recommended fuse rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Amp
Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8” W x 6” D x 1.2” H
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 lbs
Remote Trigger Ouput Current . . . . . . . . . . . . . . . . . . . . . . . . 1 Amp Max
©2006 AudioControl, a division of Electronic
Engineering and Manufacturing, Inc. All
rights reserved.