USER MANUAL

q
1%
e
t yr u i o 1) 1@1!
1#
w 1$
q
Speaker Level Inputs (40V / 400W INPUT MAXIMUM AT 20 KΩ)
w
ACR-1 level control input
e
Power Connector (LC2i PRO REQUIRES CONSTANT +12V POWER)
r
Power Status LED
t
Load Select Switch
y
Trigger Mode Switch
u
Ground Isolation Switch
i
AccuBASS Level Knob
o
AccuBASS Status LED
1)
AccuBASS Threshold Knob
1!
Main Output Level Knob
1@
Bass Output Level Knob
1#
Bass Outputs (variable with included ACR-1 level control)
1$
Maximized LED
1%
Main Outputs
Specications
Maximum Input Handling ...................40V / 400W (20 kΩ setting)
Maximum Output Level .......................................9.5 Vrms
Output Gain ..................................................+/- 12 dB
ACR-1 Attenuation Range ................................0 dB to -19 dB
Frequency Response ................................... 20 Hz to 50 kHz
Total Harmonic Distortion ........................................0.01%
Signal to Noise ................................................ >110 dB
Input Impedance ........................ Selectable (20 Ω, 60 Ω, 20 kΩ)
Output Impedance ...............................................150 Ω
Power Draw ....................................................200 mA
Recommended Fuse Rating .....................................1 Amp
Weight & Dims (with connectors) ........... 0.75 lbs. / 6.9”L x 3”W x 1”H
Warranty ...........5 Year Warranty (www.audiocontrol.com/warranty/)
©2020 AudioControl. All rights reserved. P/N 912-065-0
8 51523 00778 2
22410 70th Ave West, Mountlake Terrace, WA 98043 USA
Phone [phone]
www.audiocontrol.com