USER MANUAL

Quick Start Guide

6. RCA Analog Line-Level Inputs – The line-level output from the

head unit or factory installed radios can connect here, so the

LC-1.800 will receive the line-level audio signals. The left and right

signals are summed internally to produce a mono subwoofer sig-

nal. Do not use the speaker-level inputs if you are using the RCA

line-level inputs.

7. Remote Control Connector – This connects to the optional ACR-1

remote control and allows you to remotely control the output

level.

8. Speaker-Level Output Terminals – These screw terminals con-

nect with speaker wire to the subwoofer, or multiple subwoofers.

Make sure that the average combined speaker impedance does

not dip below 2 Ohm. The LC-1.800 has two connections (plus and

minus).