Specifications

page 6
2) Outputs: These RCA connectors should be connected to the
amplifier(s) that are in your system. Depending upon your system
configuration, you may or may not need to use all of the outputs.
3) Power Connectors: This nifty connector is a godsend to
anyone who has tried to wire up their gear with their head crammed
in a trunk. You can wire up the power, ground, and remote turn-on
while conveniently standing outside your car and then casually plug
it in the back of your 6XS.
4) Remote Level Control: This output connects, via a cable that
looks strangely like it came from your phone, to a knob assembly
that should be mounted in a location that is easily accessible while
you are operating your system.
UNDER THE COVER
Ground Isolation Selector: Occasionally alternator whine may
appear in a system because the source unit and amplifier(s) are
using different grounding
schemes. To help in this
situation, we have provided
alternative grounding
connections. Make sure
your system is turned OFF
before you move these
jumpers.
Figure 4: Under the 6XS cover