Specifications

page 3
We also highly recommend that you allow your
authorized AudioControl dealer to per-
form the installation of your 6XS to
maximize the performance of this
nifty device. Not only do they have
all the right knowledge and tools, but in the unlikely chance
your 6XS should stop working, we will back it with a limited
five years parts and labor warranty. Should you choose to install it
yourself, we will still give you one-year parts and labor warranty.
To activate your warranty, you need to FILL OUT AND SEND
IN YOUR WARRANTY CARD!
We also recommend that you save your invoice or
sales slip as proof of installation and ownership. Not
only is it necessary for warranty purposes, but should
your 6XS “disappear” one day while your car is
parked at your local latte’ stand, you will find
insurance companies very unforgiving without
proof of purchase.
QUICK INSTALL INFORMATION
We interrupt your reading of this manual to provide the
impatient people with “Quick Install” information and
guidelines:
1) Using the following system drawings as reference, decide
where in the signal path to place the 6XS. It needs to be
before your amplifiers, but after your source unit, equalizers,
CD player, VCR or blender.
2) Connect the input RCA connectors on your 6XS to your
source unit.
3) Connect the output RCA connectors from your 6XS to your
amplifier(s). You will want the “Highpass” outputs to
go to your midrange and/or tweeter amplifier(s) while your
“Subwoofer” output connects to the subwoofer amplifier. If
you value your speakers, you will want to be careful here.
4) Connect the + 12 volt power, ground, and remote
turn-on to the appropriate connections and turn the system on.