Specifications

Owner’s Enjoyment Manual
The Strength of Digital
™
Summing, Output Modes, and
Level Control
The DQL-8 has the ability to accept two, four,
six or eight inputs, sum them together, and pro
-
vide up to six channels of output. The system
diagrams on the previous pages will give you
an idea of some of the possible configurations.
Using the “Select” button, toggle through the
menu’s to the Summing Mode screen:
Figure 10: Summing
In this menu you have the ability to sum to-
gether channels, select Output Configurations,
and select whether the Level Control is con
-
trolling the Subwoofer level or is serving as the
Master Volume control for the system:
Summing: The DQL-8 will allow you to sum
together the signals from your factory installed
source unit or amplifier. This means that if your
factory installed system is actively crossed over,
you can sum the signals together into a full
range signal. Here are the
SumChs options:
“None” All Inputs and are independent.
Main Inputs feed signals to Front Highpass
out-
1) Digital Status Display: This cool blue
screen will tell you which mode your DQL-8 is in.
2) Select: Every time you tap this button, you
will scroll through the various modes in your
DQL-8.
3) “+” and “-” Navigation Buttons:
Depending upon where your cursor is flash
-
ing, these buttons will allow you to change the
frequency, apply boost/cut and vary the band
-
width or “Q” of your equalization filters.
4) Left and Right Navigation Buttons:
Within each mode there are several sub func
-
tions (i.e. Freq., Lvl, Width, etc.) that you can
access using these buttons. By tapping on these
buttons and watching the flashing cursor, you
can navigate through each function on the
screen.
Figure 9: DQL-8 Main Menu Screen
❶ ❷ ❸
¹
SumChs=1,2,3,4 DDC^
Mode=2ch Lvl=Mstr
20