USER MANUAL
-----------------------------------------------11 ----------------------------------------------
12. Remote Level Control ACR-3 (Included): In the Set-Up mode, this
control is used for seng up the signal delays. In Normal mode,
it gives control of the Subwoofer level. Addionally, if you press
and hold the remote down for 4 seconds, the outputs of the
DQDX will turn from music to Pink Noise. This will assist in the
proper seng of the EQ and Delay. When the DQDX is in Normal
mode, pressing the remote momentarily will defeat all process-
ing on the DQDX (Equalizer and Signal Delay). This is very helpful
during set-up to make sure the changes you make to the EQ and
Delay made the dierence you were looking for.
13. Pre-Amp Outputs: These RCA plugs should be connected directly
to your amplier inputs. Do not connect any speakers directly to
your DQDX and denitely do not connect to any home appliances
like your coee maker or toaster!
14. Parallel Outputs: The DQDX is equipped with a unique circuit
that allows for the Front input signal to feed the Subwoofer out-
puts. See page 25.