Install guide
page 4
A Guided Tour of DQDX
1 RCA Line-Level Inputs - The DQDX has six RCA line level inputs.
These inputs get their signals from the RCA outputs of your source unit. If your
source unit has front, rear, and subwoofer RCA Line Level outputs, connect
them to the three sets of corresponding inputs on your DQDX. If the source
unit only has one output, the Front to Sub circuitry in your DQDX selectively
routes the Front input channels to the subwoofer channels when you have the
jumper in the appropriate position (see the next section on “Under The Cover”
on internal jumper positions).
2 Input and Output Level Controls - These will allow you to adjust the
signal level from your stereo or source unit to match the input of your after-
market ampliers. Please refer to the section on Level Matching page 13 for a
more detailed description on how to set these correctly.
➎
➊
➋
➌
➍