USER MANUAL

33
AccuBASS®
This is AudioControl’s patented bass restoration for factory head units.
1. Threshold: This slider selects the level at which the AccuBASS®
processing is activated. Use the ACTIVE indicator to help set
this control. Signals below the threshold are not aected by the
AccuBASS® processing.
a. Slider fully LEFT is maximum sensitivity (lowest threshold)
b. Slider fully RIGHT is minimum sensitivity (highest threshold)
2. Level: This slider selects the amount of boost that is applied when
the AccuBASS® is active.
3. Bypass: This button disables the AccuBASS® entirely for the select-
ed output.
4. ACTIVE: This indicator is dark green when the signal has been
below the threshold for ten seconds. The indicator is bright green
when the signal has exceeded the threshold within the last ten
seconds.
Chapter 8: The Display: Output View