USER MANUAL

Installation Manual

Here are a few key items to note about the Input section:

1. Speaker level inputs are summed with line level inputs for the

same number.

2. Speaker level inputs are less sensitive than line level Inputs, as one

would expect.

3. Inputs 5 and 6 are discreet MONO inputs, primarily for use as

center and subwoofer inputs.

4. Inputs 7-8 are set with the following priorities:

1st Coaxial digital (S/PDIF)

2nd Optical digital (TOSLINK)

3rd Analog (RCA line-level inputs/speaker-level inputs /

Option Port)

This means that if the DM-608/DM-810 detects a valid digital

input to either the coax or optical input, the analog input will be

muted. If no valid bitstream is detected then the digital inputs

will be muted and the analog inputs will be enabled.

5. The input gain sliders allow a range of gain adjustment in the

analog domain, before the ADC. This allows the DM-608/DM-810

the unmatched capability to maximize headroom as well as noise

oor performance. The dynamic range of a pot with the conve-

nience of an app.

Chapter 8: The Display: Input View