Installation guide

Equalizing Procedures

Audio Analysis

It may take several series of adjustments since there is some

interaction between each control. We have included some

sample settings here and general descriptions of each control’s

function further on page 13 or here.

After initial adjustment the only time you would change the

control settings are 1) if you connect dierent speakers into the

system, 2) if (assuming the speakers aren’t built-in) you move

them signicantly, such as from a bookshelf to oor stands, or

3) if your room acoustics change through rearrangement of

furniture, wall or oor coverings, large hairy dogs, etc.

The following are examples of typical settings of the Architect™

Model 1280 EQ and1680 EQ Series Speaker Optimizer controls.

Naturally, the results of adjustments will vary depending on the

individual acoustic environment, the type of speakers, and the

personal preferences of the listener. These recommendations

are not concrete, they are simply good starting points.

Example Settings