Specifications

DESKTOP BASESDESKTOP BASES
MICROPHONES - MICROPHONE BASES
36
Preamplified desk console
with electret microphone and
compressor
3-position power button, 24-zone
+ all selection, emergency
button, generation of digital
signals for message begin/end
and programmable emergency
signals. LED indicating: open
microphone, warning and
emergency signals, selected
zones
• 424mm exible arm
• Console dimension
150x230x70mm
• Required Phantom power supply
±15Vdc
Desk console with cardioid
dynamic microphone
• 1 three-position switch
for microphone turning on
(momentarily ON, permanent
ON/OFF)
• multiconductor cable (5 m) for
the connection to the mixer with
plug-in connectors
• 7 buttons (maintained) for
closing selected + all zones and
status LEDs
AL 8000
Power Supply
Code 17074
Power Supply +15/-15V for pre amplified microphone
bases of MB-T8000 series
MBT 8006MBT 6000MB-T 8024
MB-T8024
Code 21386
Features Base with switch,
24-zone selection,
emergency button
Microphone Electret
Polar curve Cardioid
Frequency response 70Hz ÷ 18KHz
Sensitivity -63dB± 3dB
Output impedance 600ohm
Gooseneck L=370mm ø 9mm
Warning/emergency CHIME:2Tones
Signal CHIME:4Tones Emergency
Output voltage 0dBu (0,775Vrms) balanced
Power supply ±15Vdc/80mA
Material ABS with steel bottom
Accessories included Antipop filter
Optional accessories Multipair
Shielded cable 18x2x0,22
MB-T 8006
Code 30384
Features Dynamic
Directivity Cardioid
Frequency response 100Hz ÷ 12KHz
Sensitivity -75dB±3dB
Output impedance 500ohm
Material ABS with steel bottom
Accessories included Antipop filter
Optional accessories 5mt multipolar cable for connection
with amplifier MMA6120 TCD/MP3 and
MMA6240 TCD/MP3
3
4
0
3
4
0
152
6
5
Microphone console designed
for the MMZ 6000/6020 matrixes,
that can be connected to RS-485
interface
Code 31083
• 1 stereo input with auxiliary Cinch
RCA and the relevant volume
• 4 switches per sector; 4 different
“Ding-Dong” pre-call chimes
• 1 main volume for the output signal
• 7 buttons (not maintained) for
closing selected + all zones and
status LEDs
• 1 three-position switch for
microphone turning on
(momentarily ON, permanent ON/
OFF)