Specifications

MICROPHONE BASES MICROPHONE BASES
33
MICROPHONE BASES
33
Universal microphone base
• Both phantom power and 9V
battery power supply
• On/off switch with possible push/
to talk, push/to mute
Microphone base
It is automatically set to be wired
or wireless, adding the transmitter
and receiver
• On/off switch
• The base operates with power
transmitters and it is compatible
with FBTAC-PT-850B transmitters
• Where wireless transmitters not
available, it will be enough to
connect ST850 to a microphone
cable with Phantom power
supply: it will function as a
standard exible microphone
FBTAC ST 5050 FBTAC ST 850
FBTAC ST 5050
Code 27499
Frequency response 20Hz÷20.000 Hz
Stand-By power consumption 1mA
Operating power consumption 2.07mA (BAL), 1.34mA (UNBAL)
Switches Microphone selection: ECM MIC
unbalanced input, ECM MIC
balanced input, Dynamic MIC input
Connectors Unbalanced and balanced audio
input (XRL 3P Female)
Unbalanced and balaced audio
output (XRL 3P Male)
Weight 0,82 Kg
Dimensions 100x155mm
FBTAC ST 850
Code 27500
Features Back Electret Condenser
Frequency response 50Hz÷18.000 Hz
Directivity Supercadioid
Output level (at 1,000 Hz) Wireless -66±3dB (1.58mV) 0dB=1V/bar
Wired -56±3dB (1.58mV) 0dB=1V/µ bar
Impedance Wireless 2kΩ Wired 100Ω
Max SPL for 1% THD 125dB
Power supply Wireless 5VDC
Wired 12-48 VDC phantom power
Power consumption Wireless ≤0.5mA Wired ≤05.5mA
Output connector Wireless 4P <mini XRL Wired 3P XRL (M)
Switches Push control on/of
Cable lenght 305mm
Weight 1 kg
Dimensions (WxHxD) 100x65x150mm
155
100
65 310
150