User manual

4
5
3.0 INSTALLATION
While the SCP-11 is ideal for new construction or an existing home, it does
require special knowledge and tools to install. We suggest you contact a local
custom home installation specialist. Many installation specialists are members
of the Custom Electronic Design & Installation Association and can be located
through the CEDIA website: www.cedia.org.
MODEL 1180TD
TRANSMITTER
MODEL 1180TD
TRANSMITTER
MODEL 1180T
TRANSMITTER
MODEL 1180T
TRANSMITTER
MODEL 1180TD
TRANSMITTER
3.1 SYSTEM DESIGN
The SCP-11 system is comprised of the Model 1180T or 1180TD Cat 5
Transmitter and a Cat 5 Receiver, such as the Model 1180R or 1180RD. The
surface mount and decora versions of these products are electrically identical, so
this manual will refer only to the 1180T and 1180R or “transmitter” and “receiver”.
These products can be used in several different configurations, some of which
are shown below. Either transmitter can be used with one or two receivers of
either type. For applications under 700 feet, DC power for the receiver is supplied
through the Cat 5 cable from the transmitter’s power supply. For applications over
700 feet, a power supply may be required at the receiver end.
MODEL 1180RD
RECEIVER
MODEL 1180RD
RECEIVER
MODEL 1180RD
RECEIVER
MODEL 1180R
RECEIVER
MODEL 1180R
RECEIVER
MODEL 1180R
RECEIVER
MODEL 1180RD
RECEIVER
MODEL 1180R
RECEIVER